All devices

How to set up the Shelly Plus 1 in 7 steps

Step-by-step help for the Shelly Plus 1 (SNSW-001X16EU) relay. Short, clear instructions to set up the device and fix common connection issues.

What you need

• A working Wi‑Fi router with internet
• Your Wi‑Fi name (SSID) and password
• The 'Shelly Smart Control' app installed on your phone
• The device powered according to the user guide

Step by step

1. Power the deviceConnect the Shelly Plus 1 to the correct power supply (110–240 V AC, 24–48 V DC or 12 V DC) following the manual.
2. Check the LED statusLook at the red LED to identify the device status.How you know it worked: Solid ON = connected to Wi‑Fi; 1s on / 3s off = Wi‑Fi enabled but not connected; 1s on / 1s off = AP enabled and Wi‑Fi disabled
3. Open the Shelly appOpen the Shelly Smart Control app and sign in or create an account.
4. Start adding a new deviceIn the app choose 'Add device' and follow the on-screen instructions.
5. Activate AP/Bluetooth if neededPress and hold the device button for 5 seconds to enable the access point and Bluetooth if the app cannot find the device.How you know it worked: LED blinks 0.5s on / 0.5s off during the press and then shows 1s on / 1s off when AP is active
6. Select your Wi‑Fi network (2.4 GHz)In the app choose your Wi‑Fi SSID and enter the password; ensure you use the 2.4 GHz network.How you know it worked: The app shows success or the LED becomes solid ON when connected
7. Name and test the deviceGive the device a name in the app and test switching the relay on and off.How you know it worked: You can toggle the relay in the app and the LED stays solid ON

Common problems

Plus 1 won't connect to wifiPlus 1 app can't find itPlus 1 reset

Frequently asked

Updated 2026-09-09